Met de introductie van de Control10-VA modellen, groeit het assortiment EN54 gecertificeerde luidspre-
kers naar 14 verschillende modellen. Van plafond-inbouw-, tot 15” all-weather stadionluidsprekers bieden een diversiteit aan oplossingen om toe te voegen aan ontruimingsinstallaties, met behoud van de kwaliteit die u van JBL gewend bent.
De Control12C-VA is een breedband luidspreker, inclusief back-can voor een low-cost, fullrange weergave van 95Hz tot 15kHz en een egale 130° afstraling. De Control14C-VA en Control16C-VA maken respectie-
velijk gebruik van een 4”en 6” laag driver en een vloeistof gekoelde soft-dome tweeter voor extra hoog-
frequente extensie in kritische situaties.
De Control10-VA modellen kunnen worden ingezet waar de kwaliteit van uw ontruimingsinstallatie moet worden verhoogd naar een hoogwaardig geluidsysteem voor spraak of muziek. Alle modellen beschikken standaard over een 100 volt transformator, en worden geleverd inclusief bevestigingsaccessoires voor montage in systeemplafonds.
FEATURES | |
ı 76 mm (3 in) full-range driver | |
ı EN54-24 Compliant | |
ı Blind-mount backcan for quick and easy install | |
ı Combined 70V/100V and low impedance direct operation • 20 Watts at 8Ω nominal setting • 15W multi-tap at 70V/100V |
|
ı 68 Hz – 17 kHz bandwidth with wide 130° coverage | |
SPECIFICATIONS
|
|||
Frequency Range (-10 dB) | 68 Hz – 17 kHz | ||
Frequency Response (±3 dB) | 95 Hz – 15 kHz | ||
Power Capacity (at low-Z) | 40 Watts Continuous Program Power 20 Watts Continuous Pink Noise |
||
Rated Noise Power | 15W (15W tap) | ||
Rated Noise Voltage | 70V/100V (with 70V/100V tap settings) | ||
Nominal Sensitivity | 84 dB: 8 ohm tap | ||
EN54 Sensitivity (@ 4m) | 72 dB (per EN54-24 spectrum and measurement conditions at 4 meters.) | ||
Coverage Pattern | 130° conical coverage (1 kHz - 16 kHz) | ||
Coverage Angels (by Frequency) Conical (Vertical & Horizontal) |
500 Hz: 180° 1000 Hz: 175° 2000 Hz: 170° 4000 Hz: 160° |
||
Reference Axis | Specification and measurement reference is directly on-axis vertically and horizontally, directly below the speaker as speaker it is installed in the horizontal ceiling plane | ||
Directivity Factor (Q) | 9.8 | ||
Directivity Index (DI) | 7.4 dB | ||
Rated Maximum SPL | 97 dB @ 1 m (3.3 ft) average, 103 dB peak | ||
EN54 Max SPL (@ 4m) | 84 dB (per EN54-24 spectrum and measurement 15W tap, at 4 meters) | ||
Nominal Impedance | 8 ohms (in direct/bypass 8Ω setting) 1.9W@70V; 3.8W@100V Tap: 2667Ω 3.8W@70V; 7.5W@100V Tap: 1333Ω 7.5W@70V; 15W@100V Tap: 667Ω 15W@70V; N/C@100V Tap: 333Ω |
||
Transformer Taps | 15W, 7.5W, 3.8W @ 70V or 100V (plus 1.9W @ 70V only) | ||
Fuse | Thermal Fuse, open temperature 152 degrees C, Rating >= 10A @ 250VAC | ||
Driver | 76 mm (3 inch) with polypropylene cone, butyl rubber surround, anodized aluminum voice coil former, high temperature voice coil | ||
Connections | Input +, Input -, Earth (connected to backcan). Ceramic block with brass inserts (3.2 mm/0.126 in opening), accommodates 2.5 sq mm / 12 AWG wire. | ||
Gland Nut/Strain Relief | Accommodates round jacketed cables 4.0 mm (0.16 in) through 9.0 mm (0.36 in) | ||
Materials | ABS baffle with UL94-V0 and UL94-5VB flame class fire rating; Zinc-plated steel backcan | ||
Safety Agency | EN54-24:2008 certified Type A (Certificate No. 0359-CPR-00485); Compliant with BS5839/8; UL1480, UL2043, NFPA90 & NFPA70; Suitable for use in air handling spaces, Signaling Speaker; rated IP-21 per IEC529/60529; Transformer UL registered per UL1876; ROHS, C-tick N108, CE compliant; Baffle meets UL94-V0 and UL94-5VB flammability rating; In accordance with IEC60849/ EN60849 systems | ||
Dimensions (H x W x D) | 196 mm diameter x 174 mm from back of baffle to back of gland nut (7.7 in diameter x 6.9 in in depth) | ||
Ceiling Cutout Size | Circular cutout with 170 mm (6.7 in) diameter (cardboard cutout template included) | ||
Ceiling Thickness Range | Up to 35 mm (1.4 in) with stock dog-ears. MTC-TCD thickceiling dog-ears available for up to 55 mm (2.2 in) ceiling thicknesses | ||
Safety Seismic Attachment | One point, top surface | ||
Net Weight | 1.6 kg | ||
Included Accessories | C-ring support backing plate, 2 tile support rails (for 2 ft or 600 mm tile spans; optional MTC-48TR extension available for larger 4 ft or 1200 mm tile spans), cutout template, paint shield, grille | ||
Optional Accessories | MTC-12WG high humidity grille MTC-24NC new construction bracket MTC-24MR mud-ring construction bracket MTC-TCD thick-ceiling dog-ears for ceiling thicknesses up to 55 mm (2.2 in, ordering one set = 24 dogears for 8 speakers) MTC-48TR tile rail for 1200 mm (4 ft) tile spans |