AMX Solecis SDX-515M-DX - 5x1 analog/digital switcher

The SDX-514M-DX is a multi-format AV switcher for analog and digital signals with DXLink transformer. Resolutions up to 4K and UHD video formats are supported. It offers a simple solution to switch multiple sources.

It can be used to switch 5 input signals and route them to an output device (display / projector) via a DXLink and HDMI output.

The selection of the source can be done on the device or via an external keypad.

Technical Data

AV Switching: 5x1 (Dual) Audio/Video Switching, any of the 5 inputs can be routed to HDMI and DXLink output.
Video inputs: 3x HDMI (supports HDMI/HDCP), also usable via passive adapters for DVI-D Single Link and DisplayPort++ (transmit only); 2x HD-15 for VGA/RGBHV up to 1920x1200@60 Hz
Video outputs: 1x HDMI (supports HDMI/HDCP); 1x DXLink (supports digital video, audio, Ethernet and bidirectional control) with usable CAT cable lengths of 100m at resolutions up to 1080p and 70m at 4K.
Audio inputs: 2x 1/8'' mini stereo jacks, analog input level -2 dBu unbalanced, AD conversion 48 kHz sample rate, 24-bit, A/D reference level +2.5 dBu = 0 dBfs; 3x audio embedded via HDMI inputs
Supported audio formats: Dolby TrueHD, Dolby Digital, DTS-HD Master Audio, DTS, 2 CH to 8 CH L-PCM; Dolby Digital and DTS support up to 48kHz, 5.1 channels
4K resolution support: 3840 x 2160p @ 24/25/30 Hz, 4096 x 2160p @ 24/25/30 Hz, 3840 x 2160p @ 60 Hz, 4:2:0, 4096 x 2160p @ 60 Hz, 4:2:0. Resolutions up to 1080p are handled with 4:4:4 color space.
AxLink Keypad Port: 1x 4-pin 3.5mm Phoenix terminal, provides data and power for up to 2 external AxLink keypads
Ethernet Connections: 2x RJ-45, 10/100 port provides TCP/IP communications; one Auto MDI/MDI-X capable port that allows use of straight-through or crossover Ethernet cables. Ethernet port LEDs indicate communication activity, link status, speeds and mode information.
Compatible AMX devices: Enova DVX/DGX and DXLink products Enova DGX 800/1600/3200/3200/6400 Digital Media Switchers with DGX-I-DXL-4K DGX DXLink Twisted Pair 4K Input Board installed DX-RX-4K, DXLink 4K HDMI Receiver Module as a point-to-point solution; also compatible with Full HD resolution input boards and receivers, but in these cases without 4K signal processing.
Power supply: internal power supply 110-240V, 47-63 Hz
Dimensions (H x W x D): 42.16 x 253.8 x 177.8 mm